Evaluate circuit material effects on PCB antenna PIM: Page 3 of 6

October 17, 2016 // By John Coonrod, Rogers Corp.
Evaluate circuit material effects on PCB antenna PIM
Antennas are key components in modern communications systems, and printed-circuit-board (PCB) antennas are attractive for their capabilities of providing strong performance in small footprints. As PCB antennas are used over wider frequency ranges and in communications devices ranging from base stations to handsets, circuit designers are faced with understanding how different PCB material characteristics relate to antenna performance.

Intermodulation distortion, including PIM in passive PCB antennas, is of increasing concern with the growing numbers of wireless emitters. As Figure 2 shows, intermodulation results from the mixing of two or more closely located transmitted fundamental-frequency signals, f1 and f2, and their harmonics, 2f1, 2f2, 3f1, 3f2, and so on. The total of the coefficients of two mixing signals, such as 2f1 – f2 (2 and 1), determines the order of the resulting intermodulation product. As wireless services and their numbers of users increase, opportunities for intermodulation increase, with greater numbers of transmitted high-frequency signals. Intermodulation can occur in active circuits, such as frequency mixers or amplifiers, or as PIM in passive circuits, such as filters, couplers, and antennas.

Figure 2:  Intermodulation distortion is caused by the mixing of two or more fundamental-frequency tones and their harmonics.

Circuit materials and PIM

From Figure 2, it can be seen that PIM levels decrease with increasing order number, and that the third-order PIM products are usually of the greatest concern. Figure 2 does not show them, but even-order intermodulation products are also produced, and these can be a concern in some broadband applications. When the frequencies of any intermodulation products are within the frequency range of a nearby receiver, and the levels of the intermodulation products exceed the sensitivity of the receiver, they essentially function as noise to the receiver and can cause dropped calls, loss of data, and generally degraded wireless service.

Design category: 

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.